Eagle Carports Metal Buildings Components

Metal Buildings Component Visualizer

See what all the parts of the metal building are

base structure
Component Visualizer
Component Visualizer
Component Visualizer
Component Visualizer
Component Visualizer
Component Visualizer
Component Visualizer
Component Visualizer
  • ROOF PANELS:

    Our panels are 29 gauge steel. Available in standard lengths of 21', 26', 31', and up to 36' in certain areas. We have 14 colors available to choose from. Custom lengths are available upon request.

  • RIDGECAP:

    A transition piece covering the ridge of the roof. The ridgecap is normally color matched with the roof panels. However, if the customer wishes to change the color it must be specified when completing your order.

  • HAT CHANNELS:

    A galvanized steel component that is used to create a vertical roof orientation. The hat channel also provides more ridgidnes for a stronger structure.

  • BOWS:

    A single piece of square tubing used to make the roofing member of a building. The tubing can be made from either 14 gauge or a 12 gauge steel.

  • BRACES:

    Braces are U-shaped channels that are used to reinforce the structure of a building. For buildings in which the braces are optional we recommend 2' braces on buildings shorter than 8' and 3' braces for buildings 9' or taller.

  • BASE RAILS:

    The square tubing on the base of the building onto which the legs are attached to.

  • LEGS:

    Legs are the vertical tubing that connect the bows (top) to the base rail (bottom). The leg height varies depending on the type of building.

  • TRIM:

    Trim to give the roof and building corners a finished and a more asthetic view.

Eagle Carports

Questions? Contact Eagle Carports Below.

"*" indicates required fields

Name*
Address*
This field is for validation purposes and should be left unchanged.